Sangean DDR-33+ (R1) - Manual (Page 20)

19
Recalling a preset station
1. Press the On / Standby button to switch on the radio.
2. Press the Mode button to select the desired waveband.
3. Press and release the Preset button. The display will show,
for example, “Empty 1” if no station has been stored to that preset.
If a preset has been stored, then the display will show either the
station name (for DAB stations) or the frequency (for FM stations).
4. Press the Tuning Up or Down buttons to select the desired
preset station.
5. Press the Preset button. Your radio will tune to the chosen preset
station stored in the preset memory.