Sangean PR-D4 (R2) - Manual (Page 11)

10
b. When the alarm sounds
5. To cancel a sounding alarm, press the Standby button to cancel a
sounding alarm.
c. Disabling / cancelling alarm setting
7. To cancel the buzzer alarm setting, press and hold the buzzer
alarm button for 2 seconds (followed by a beep) before the alarm
sounds off.
Snooze function
1. Whilst the alarm is activated, press any buttons except the
Power button will active the snooze function. The radio or
HWS buzzer alarm will be silenced with interval of 5 minutes.
2. The display will flash both the snooze symbol and the
alarm symbol. The snooze function can be repeatedly during the
1 hour that the alarms are active.
Sleep function
The sleep timer will automatically switch off the radio after a preset
time has elapsed.
1. Press and continue to hold down the Power button for more than
2 seconds, followed by beep tone , the display will cycle through
the available sleep times in the order 60-45-30-15-120-90-60.
Release the Power button when the required sleep time appears
in the display. The symbol will appear in the display and the
radio will play the last station selected .
2. To cancel the sleep function, press the Power button,
the symbol will disappear and radio is off.
GB