Sangean DDR-47BT (R1) - Manual (Page 11)

0
Selecting a station - DAB
. When the unit is in DAB mode the upper line of the text display normally shows the name of
the station currently tuned.
. Repeatedly press the Tuning Up or Down buttons to scroll through the list of available stations
on the lower line of the text display. Stop pressing the Tuning buttons when you find the station
that you wish to hear. If you keep pressing one of the tuning buttons then the unit will rapidly
scroll through the list of available stations.
3. Press and release the Select button to cause the radio to tune to the chosen station. The display
may show “Now tuning” while your radio finds the new station. The use of memory presets is
described in the later section.
4. Adjust the Volume to the required setting. If after selecting a station the display shows “Service
not available” it may be necessary to relocate your radio to a position giving better reception.
Secondary services - DAB
. Certain radio stations may have one or more secondary services associated with them. If a
station has a secondary service associated with it the display will show “>>” next to the station
name on the station list. The secondary service will then appear immediately after the primary
service as you press the Tuning Up button.
. Press and release the Select button to select the station.
DAB
DAB