Sangean DDR-36 (V1) - Manual (Page 23)

GB
) If ‘DDR-6’ shows in your Bluetooth device list but your device cannot connect with it, please
delete the DDR-6 item from your list and pair the device with DDR-6 again following the
steps described previously.
4) The effective operation range between the system and the paired device is approximately 0
meters (0 feet).
5) Any obstacle between the system and the device can reduce the operational range.
6) Different playback functions are available in Bluetooth mode(i.e. Play/ Pause/ next track/previous
track/ fast-forward/ rewind). However, Bluetooth-enabled devices vary in how they respond to
the playback dependent upon the model.
Pair with your Bluetooth device before
If your Bluetooth device already paired with DDR-6 previously, the unit will memorize your
Bluetooth device, but it does not support the automatic reconnection, reconnect with this product
following the steps below.
DDR-6 can memorize up to 8 sets of Bluetooth device, when the memory exceed this amount,
the earliest paired device will be over written.
. Press and release the Pair button to enter the Bluetooth device memory. Then rotate the Tuning
control to find the desired memorized Bluetooth device and press the Select button to connect
to the required Bluetooth device.
. Alternatively, repeatedly press and release the Pair button to have access to the stored Bluetooth
device and press the Select button to connect to the required Bluetooth device.