Sangean DDR-36 (V1) User Manual
Page 33
GB
Setting the clock format
The display used in standby mode and when the radio is in use can be set to or 4 hour
format. The selected format is then also used when setting the alarms.
. Press the Standby button to switch on your radio.
. Press and release the Menu button until the Advanced menu shows on the display.
. Rotate the Tuning control until 'System Setting' appears on the display. Press and release the
Select button.
4. Rotate the Tuning control until 'Time' appears on the display. Press and release the Select button.
5. Rotate the Tuning control until 'Time /4 hour' appears on the display. Press and release the
Select button.
6. Rotate the Tuning control to select either or 4 hour format. The current hour format will be
marked with an asterisk. Press and release the Select button.
If the hour clock format is chosen, the radio will then use the hour clock for setting of
alarms, and will display a hour clock with an AM or PM indicator when in standby mode.
DAB
System Setting
Set 12/24 hour
Set 12/24 hour *