Warning, Make sure player is unplugged from ac mains before, Servicing – Cary Audio Design CD 200 User Manual
Page 9
3.11 Repeating Play (repeat)
REPEATING A TRACK:
- Press REPEAT before or during playback.
-
REPEAT ONE Lights up; the track will be repeated continuously.
-
REPEAT ALL Lights up; the disc will be repeated continuously.
-
Press REPEAT until the indicator goes off to stop the track being repeated.
3.12 Programming
-
Press PROGRAM once on the remote; PROGRAM indicator on the display will blink
indicating the program mode is now entered.
-
Key in track nos. in sequence to be played.
-
Press either CLEAN or DELETE to edit input or cancel the program.
-
When programming is completed, press PLAY or on the remote to start playing the
programmed tracks.
3.13 Break- In Period
The micro-components, capacitors and output transformers take approximately 100 hours of
music playing to fully settle in for peak performance. The CD-306/200 will seem OK sounding
right out of the box. However, after the first couple of hours you will notice increased depth and
tighter bass. This break-in period contradicts engineering theory, but is true with most HIGH
PERFORMANCE audio components.
WARNING
MAKE SURE PLAYER IS UNPLUGGED FROM AC MAINS BEFORE
SERVICING
P.8