Sangean BluTab BTS-101 (V1) - Manual (Page 9)

GB
8
Using BluTab as handsfree speaker phone
Your speaker can be used as a speakerphone. When calls come in to
your music source device while the music is playing, it will pause the
music automatically to allow you to answer your phone.
. Pair your device to the speaker via Bluetooth as described in the previous
sections.
2. Press and release the Bluetooth/Call answer-hangup button to answer
and hang up your phone call.
3. Press the Volume up/down buttons to adjust the volume to your liking.
4. To redial the last phone call made on your smartphone, double click
the Bluetooth/Call answer-hangup button in quick succession.
Note:
If you cannot answer/hang up your phone via your speaker, it may be
necessary to check whether the ‘Phone audio’ setting is activated on
your Bluetooth –enabled device.
Playing music via auxiliary input socket
A 3.5mm Auxiliary input socket is provided on the right hand side of the
unit to permit an audio signal to be fed into the unit from any devices that
features a headphone or audio output, such as an iPod, MP3 or CD player.
. Connect a stereo or mono audio source (for example,
iPod, MP3 or CD player) to the Auxiliary input
socket.
2. Adjust the Volume control on your iPod, MP3 or
CD player to ensure an adequate signal and then
adjust the volume on the speaker for comfortable
listening.
Note:
When Aux in socket is connected an audio device,
Bluetooth function will be disabled to minimize power
consumption.