Sangean BluTab BTS-101 (V1) - Manual (Page 5)

GB
4
Pairing and connecting a device to the speaker
Pairing and playing your Bluetooth device for the first time
You need to pair your Bluetooth device with your BluTab (BTS-0)
before you can auto-link to play/stream Bluetooth music through
your Bluetooth speaker. Paring creates a `bond' so two devices can
recognize each other.
. Before turning on the speaker, make sure the power lock is switched off.
The Bluetooth status indicator ( ) on the speaker flashes fast flashing
blue to show the speaker is discoverable.
2. Activate Bluetooth on your device according to the device's user manual
to link to the speaker. Locate the Bluetooth device list and select the
device named ‘SANGEAN BLUTAB.’ With some mobiles (which are
equipped with earlier versions than BT2. Bluetooth device), you may
need to input the pass code “0000”.
3. Once connected, there will be a beep sound and the Bluetooth icon
will remain in solid blue. You can simply select and play any music
from your source device. Volume control can be adjusted from your
source device, or directly on BluTab.
(Note: If the maximum volume of the speaker has been reached, indicator
for ‘MAX VOL.’ marked on the front panel stay solid red for 2 seconds.)
4. Use the controls on your device to play/pause and navigate tracks. In
addition, you can press and release the Bluetooth/Call answer-hangup
button to play/pause the tracks.
(Note: If you press the Bluetooth/Call answer-hangup button twice in
quick succession, your BluTab will redial the last phone number made
on your smartphone.)
Note:
1) If 2 Bluetooth devices, pairing for the first time, both search for BluTab
(BTS-0), it will show its availability on both devices. However, if one
device links with the speaker first, then the other Bluetooth device
won't find the speaker on its list.