Sangean DMS-37BT (V1) - Manual (Page 36)

35
1
2
4
Recording MP3 / WMA files from CD / SD / USB
In addition to recording from conventional sources, the DMS-37BT sound system can also record
from MP3 or WMA files that have previously beenthan re-encoded to MP3 in order to avoid a
reduction in quality. You may copy files from CD or SD to USB and from CD or USB to SD.
. Select the desired source for the recording (SD, USB or CD).
. Press the Play button to start playing the source media (if it does not automatically start). Set
the volume to the required listening level (the volume of the recording will not be affected by
this).
3. Insert the media that the files will be recorded on to (SD or USB).
4. Press the Record button on the remote control. The display will show "Record init...".
5. If only one media type is present, the audio will stop while the source media is taken back to
the beginning of the current file. Recording will then start.
6. If both SD and USB media are detected, then a menu is offered to allow you to choose between
Card and USB recording. Select one or the other as needed using the Tuning Up or Down
buttons and then press the Select button. The source media will be taken back to the beginning
of the current file and recording will then start.
7. In order to stop the recording press the Record button once more. Recording and playback will
stop and all files that have been played will have been copied to the storage media.
7