Sangean DMS-37BT (R1) - Manual (Page 52)

5
Touch panel sensitivity control
The sensitivity of the touch panel may be adjusted. The default setting will normally be found
to provide satisfactory operation, however, the touch panel system may respond differently
depending upon the moisture of the skin. The touch panel sensitivity may be reduced or
increased relative to the standard setting.
. Press and hold the Menu button so that the display shows “Set Brightness” on the lower line of
the text display.
2. Press and release the Tuning Up or Down buttons until the display shows “Touch Pad Set”.
3. Press and release the Select button to show the current setting.
4. Press and release the Tuning Up or Down buttons to change the touch panel sensitivity level.
5. Press and release the Select button to save the new setting.
The default setting after a system reset is High.