Sangean DMS-37BT (R1) - Manual (Page 39)

38
GB
Listening to Bluetooth music
You need to pair your Bluetooth device with your radio before you can auto-link to play / stream
Bluetooth music through your DMS-37BT. Paring creates a permanent `bond' so two devices can
always recognize each other.
Pairing your Bluetooth device
1. Press the Source button to select Bluetooth function. The Bluetooth icon on the panel will flash
with every 0.4 second interval.
2. Activate Bluetooth on your device according to the device's user manual to allow the paring
procedure. With some mobile, you may need to input the pass code “0000”.
3. Now the Bluetooth icon ( ) will flash with 1 second interval. You can start the search of
DMS-37BT on your Bluetooth device. Once DMS-37BT is appeared on your Bluetooth device,
press the item in your Bluetooth list and it will link with your DMS-37BT.
4. Once connected, the Bluetooth icon will remain illuminated. You can now play the music in
your Bluetooth-enabled device via DMS-37BT.
Note:
a) If there are 2 Bluetooth devices searching for DMS-37BT, it will show its availability on both
devices. However, if one device links with the DMS-37BT first, then the other Bluetooth device
won't find the DMS-37BT on its list.
b) If your Bluetooth-enabled device is temporarily disconnected to your DMS-37BT. As long as the
disconnection last within 7 minutes, your device can re-connect with your radio again automatically.
If the disconnection last more than 7 minutes, then you need to manually reconnect your device
again to the radio. Be aware that during the period of disconnection, no other Bluetooth device
can pair or link with your radio.
c) The effective operation range between the docking system and the paired device is approximately
0 meters (30 feet).
d) Any obstacle between the system and the device can reduce the operational range.
1