Setting the alarm clock - cont – Sangean WFR-28C (V1) User Manual

Page 67

Setting the alarm clock - cont.

7-9

Enable:Once
Time: 07:30
Mode: Buzzer
Volume: 20
Save

Alarm 1

Enable:Once
Time: 07:30
Mode: DAB
Preset: Last listened
Volume: 20

Alarm 1

24-08-2010

07:30

Alarm1 date/time

Enable:Off
Time: 07:30
Mode: Buzzer
Volume: 20
Save

Alarm 1

Off
Daily
Once
Weekends
Weekdays

Alarm 1 frequency

Buzzer
Internet radio
DAB
FM

Alarm 1 mode

Last listened
1. Radio Luxembourg
2. Rlck Antenne
3. Absolute Radio
4. [Not set]

Alarm 1 preset

Rotate the

Tuning Control Rotary to highlight 'Enable' and press the Tuning Control Rotary.

The display will show the Frequency options for the alarm. The alarm frequency options are as
follows:
'Off' - the alarm will be disabled
'Daily' - the alarm will sound everyday
'Once' - the alarm will sound once
'Weekends' - the alarm will sound only at weekends
'Weekdays' - the alarm will sound on weekdays only
Rotate the

Tuning Control Rotary to choose the required alarm frequency option. Choosing

Off will disable the alarm. Press the Tuning Control Rotary to confirm the selection. If you
choose to set the alarm to Once you will also need to set the date using the

Tuning Control

Rotary.

The alarm can be set to buzzer, Internet radio, DAB radio, FM radio. For whichever radio
mode is selected, the radio alarm may be set to any of the stations which have been stored
as presets or to the station most recently listened to. Rotate the

Tuning Control Rotary to

highlight the current 'Mode' option for the alarm, then press the Tuning Control Rotary if you
wish to change it. Rotate the Tuning Control Rotary to highlight either 'Buzzer' or the required
mode. Press the

Tuning Control Rotary to confirm the selection.

If setting the alarm to a radio option, rotate the

Tuning Control Rotary to highlight the 'Preset:'

option then press the

Tuning Control Rotary if you wish to change it. Choose from either the

radio station 'Last listened' to, or from the presets - 5. Scroll to the chosen option and press
the

Tuning Control Rotary to confirm the selection. Note that you can only set the alarm to

use a preset which has already been stored.