Sangean WFR-28C (V1) - Manual (Page 59)

58
GB
Scan setting
When using the FM mode your radio can be set to either scan local stations or to scan all
stations including distant radio stations.
. Press the Mode button and rotate the Tuning Control Rotary as needed to highlight FM radio
mode. Press the Tuning Control Rotary to select the option.
2. Press the Menu button to enter the FM menu.
. Rotate the Tuning Control Rotary until 'Scan setting' is highlighted and then press the Tuning
Control Rotary to enter the scan adjustment mode. The current scan setting is indicated with
an asterisk.
4. To set your radio so that only the stations with the strongest signals are found during scanning
rotate
Tuning Control Rotary until 'YES' is highlighted. Press the Tuning Control Rotary to
confirm the setting. (Normally this will restrict scanning to local transmissions.)
Alternatively, to set your radio so that all available stations are found during scanning (local and
distant transmissions) rotate the Tuning Control Rotary until 'NO' is highlighted. Press the Tuning
Control Rotary to confirm the setting.
2
1
3,4
FM
radio
104.90MHz
FM 10:38
FM Radio
FM
Scan setting
Audio setting
System setting
Main menu
>
>
Strong stations only?
FM station scan
Strong stations only?
FM station scan