Vernier Spectrum Tube Single Power Supply - Manual (Page 2)

System Parts
Power Supply & Storage Unit
1. Wall mount power supply
2. Tube storage recesses
3. Power supply body and electronics
4. Tube well
5. Tube insertion aperture
6. Fiber holder (pictured below)
Tube
a. Tube
b. Hard polymer shell
c. Spring-loaded contacts
d. Gas species label
e. Safety interlock magnet
Specifications
Wall mount power supply input: 120VAC/60Hz; output: 15VDC, 1000mA,
UL listed
Tube energizing supply: 1.8 kV AC
Power Supply & Storage Unit dimensions: 26 Ч 18 Ч 29.5–38.0 cm
weight: 2.55 kg
Fuse: T1AL 250V, 5 × 20 mm miniature
Height of center of light-emitting
region above bench:
21.5–30.0 cm
Length of light-emitting region: 4.75 cm
Tube dimensions (in shell): 15.5 Ч 4.0 Ч 3.0 cm
weight: 88 g.
Fiber Holder
The Fiber Holder for the Spectrum Tube Single Power Supply securely holds an
optical fiber in the proper position to carry light from the discharge tube to the
spectrometer. Compatible with both Ocean Optics fibers and Vernier SpectroVis
series fibers. The position of the fiber can be adjusted to optimize the light
intensity. The Spectrum Tube Single Power Supply ships with one Fiber Holder.
Additional holders can be purchased.
Order code: ST-FHS