Hexin Technology HXSP-1001 RS-232/RS-485/RS-422 to Ethernet TCP/IP Serial Device Server - Manual (Page 3)

Port memory: 512 byte
Transmit distance: 100m
Interface protection: 1.5KV ESD
Interface type: RJ-45
Serial
NO.of ports: RS-232,RS-422/485 4 bits terminal block
RS-232 signal: TxD, RXD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 signal: Tx+, Tx-, Rx+, Rx-,GND
RS-485 signal: Data+, Data-,GND
Parity: None, Even, Odd, Space, Mark
Data bit: 7bit,8bit
Stop bit: 1, 1.5, 2
Transmission speed: 1200bps ～ 115200bps
Flow control: support RTS/CTS flow control or not flow control.
RS485 data direction: ADDC (Auto data direction Control).
Loading: RS-485/422 side support 32 nodes (optional 128 nodes)
Transfer distance: RS-485/422 side: 1200m, RS-232 side: less than 15m
Port protect: 1500W surge protect,15KV ESD Protect
Port type: RS-232 DB-9 male，RS-485/422 4bit terminal
Power supply
Power supply input: 9VDC
Consumption: 300mA
Environmental
Operating temperature: -20℃～60℃, 5～95% RH
Storage temperature: -25℃～85℃, 5～95% RH
Appearance
Color: blue and white
L×W×H: 100mm×69mm×22mm
Material: Iron
Weight: 230g
【Interface and LED】
10Base-T Ethernet port
Device connected to Ethernet: Red LED flash
Ethernet port has data transfer: Green LED flash
The 10/100BaseT(X) ports located on HXSP-1001 front panel. The pin of RJ45 port
display as below. Connect by UTP or STP. The connect distance is no more than 100m. 100Mbps
is used
100Ωof UTP , 10Mbps is used 100Ωof UTP 3,4,5