Hexin Technology HXJZ-878 10km-20km Middle Power RS-232/RS-485/TTL to RF Wireless Module - Manual (Page 6)

HXJZ-878 RF Data Radio User’s Manual
HXJZ-878 parameters setting
HXJZ-878 have one interface of TTL、 RS232、 RS485, You must specify the interface when you order. HXJZ-
878
main parameters: COM baud rate and verify，RF baud rate, Channel and frequency。
You can change these parameters by our RF Module software. When RF baudrate is
faster than COM baudrate，One frame Can transmit limitless data. When RF baudrate is not faster than
COM baudrate ，One frame Can transmit 255 bytes. You can set the rate according your request.
Two HXJZ-878 communication must have conditions as follows:
1. Their channels (i.e. frequency) is same.
2. Their RF rates is same.
3. RF Module Com baud rate and verify is agree with its equipment or PC that it connects with.
1) Parameters default value:
Channel： 1
Interface speed rate：9600BPS
Interface verify：none
Speed rate in air：9600BPS
2) Channel and frequency list
Channel Frequency Channel Frequency
1 430.2000MHZ 9 458.5250MHZ
2 431.4288MHZ 10 459.1250MHZ
3 431.7360MHZ 11 459.5250MHZ
4 430.5072MHZ 12 460.1250MHZ
5 434.6940MHZ 13 460.5250MHZ