Hexin Technology HXSP-1002A 2-Port RS-232 to Ethernet Serial Device Server - Manual (Page 9)

Other Virtual COM port setting the sa me as COM5
Note: Pay attention to the questions as below:
(1) Please make sure that the power adapter is 5VDC
(2) When connect to PC, use cross-over cable.
(3) When connect to HUB or Switch, use straight-through cable
【Installation】
HXSP-1002 provides DIN-rail and wall mounting two types of installation
DIN-Rail Installation
In order to use in industrial environments expediently, adopt 35mm DIN-Rail installation, the
installation steps as fellows:
Examine the DIN-Rail attachment
Examine DIN Rail whether be firm and the position be suitability or not .
Insert the top of the DIN-Rail into the slot just below the stiff metal spring.
The DIN-Rail attachment unit will snap into place as shown below.