Hexin Technology HXSP-1002A 2-Port RS-232 to Ethernet Serial Device Server - Manual (Page 5)

RS-232 RS-485 RS-422
1 TXD D+ RX+
2 RXD D- TX+
3 RTS RX-
4 CTS TX-
5 DSR FULL
6 GND GND GND
7 DTR
8 DCD
【Software installation and setting】
1 Set the IP address of the device
The IP address of the device and the PC must in the same subnet network
(the default IP address of the device is 192.168.1.233). First, must make the IP address of
the device in the same subnet network of PC.
If they are not in the same subnet network or the IP address have been used by another device,
Use Telnet change the IP address of the device
1 “Start”------“all programs”------“Running”
Input default IP address of the device “Telnet: 192.168.1.233”