Assembly of the middle tensioner onto chassis, Assembly of the middle belt, Assembly of the middle belt tensioner – OFNA Racing OB4 RTR User Manual
Page 20

4 mm E-Ring x2
3mm
E-Ring
3mm
E-Ring
ASSEMBLY OF THE MIDDLE TENSIONER ONTO
CHASSIS
35958
5 X 8 X 2mm
Ball Bearing
32
33
ASSEMBLY OF THE BATTERY HOLDER AND RECEIVER
OPTIONAL FLAT PACK BATTERY HOLDER
39416
Battery Holder
37420
Sided
Tape
* Use strong tape to secure the battery.
6V-600mhA - ncad
or NEW
6V1000mhA - Ni-Mh
#10211 $ 29.95
Ni-Mh Charger
#10214 $7.95
3 x 3mm
Set Screw x2
* The 6V battery is
not included in kit.
* Insert belt onto 17T pulley
before assembly.
37400
2 x 8.8
Pin
4mm
E-Ring
4 mm E-Ring x1
37400
37751
2 x 8.8mm
Pin x1
38050
Pulley Mount
37661
17T Pulley
* Do not use the 16 tooth
pulley here.
37661
17T
Pulley Washer
* Take the 17T pulley washer
from 37661 plastic tree.
39414, Plastic
Middle Belt
Stiffener
39318
Belt Guide
39318
Roller Washer
ASSEMBLY OF THE MIDDLE BELT
30
OPTION PARTS: 37943
ALUM. PULLEY MOUNT
38070
177 Belt
39318
Belt Tension
Roller kit
4 mm E-Ring x1
3 x 10mm
Screw x1
30212
5mm x 8mm
Flange Ball bearing
5 x 8 x1mm
Washer
OPTION PARTS:
4mm
E-Ring
3 x 10mm
Screw
39414
Belt Tension
Roller
ASSEMBLY OF THE MIDDLE BELT TENSIONER
31
OPTION PARTS: 39465
ALUM. MIDDLE BELT
STIFFENER
*Take the roller washer
and belt tension roller from
39414 Plastic parts tree.
37710
37710
Body Clips
Body Clips
* Tighten the cable ties
and cut off the excess.
39424
Battery Holder
Plate
Receiver Battery
39425
Battery carrier
30830
Cable Ties
(Large)