beautypg.com

Operation home-safe® program, Operation safe-exit® and light-minder® program, Operation home-safe – Casablanca Fan Company Panama 6643Z User Manual

Page 20: Operation safe-exit, And light-minder, Program

background image

20

®

3

oPeraTIoN HoMe-Safe

®

ProGraM

The

home-Safe program makes an unoccupied home appear occupied by turning

the lights on and off at random times.

To enter the Home-Safe Program:

1) To operate the lights and fan for Home Safe Program – Press the

But-

ton off for a least 5 seconds.

2) Turn the

on. Immediately press the buttons in the following sequence:

+

+

+

. A series of tones will be heard through the

piezo-buzzer and flashing lights indicating the command has been accepted will

follow. This program overrides all manual control of lights and fan.

Once the lights

turn on, they will automatically turn off after 2 hours.

3) The lights will automatically cycle on and off in a controlled sequence as follows:

ON 1 hour, OFF ½ hour, ON 2 hours, OFF 1 hour, ON ½ hour then OFF 2 hours.

This seven hour pattern will repeat continuously so that a different pattern of lighting

is seen each day of the week.

4) To cancel the Home-Safe Program, press the

Button OFF for five

seconds.

oPeraTIoN Safe-eXIT

®

aND LIGHT-MINDer

®

ProGraM

Note: Both Light-Minder and Safe-Exit programs will always run at the same

time.

The

Light-Minder Program automatically turns OFF the fan mounted lights after two

hours.

to enter the Light-Minder Program:

1) To operate the lights for Light Minder Program – Press the

button off for at

least 5 seconds.

2) Turn the

on. Immediately press the buttons in the following sequence:

+

+

+

. A series of tones will be heard through the piezo-

buzzer indicating the command has been accepted. Once the lights turn on, they will

automatically turn off after 2 hours.

3) Light operation still remains normal, if you leave the room and turn OFF the lights

will blink to indicate this Safe-Exit command has been accepted. The lights will stay

on for 30 seconds and then begin to dim. After thirty seconds have elapsed, the lights

will turn completely off.

4) To cancel the Light-Minder and Safe-Exit Programs, press the

button.

The

Safe-exit Program gives you about thirty seconds of light when you turn the

lights off, enabling you to exit your home before the lights go out. To enter the Safe-

Exit Program:

1) To operate the lights for Safe-Exit Program – Press the

button off for at

least five seconds.

2) Turn the Power on. Immediately press the buttons in the following sequence:

+

+

+

. Immediately press the

Button after an audio tone

is heard from the fan controller. The lights will blink to indicate this command has been

accepted. The lights will stay on for 30 seconds and then begin to dim. After thirty

seconds have elapsed, the lights will turn completely off.

3) To cancel the Safe-Exit Program, press the

button off for five seconds.

NOTE: If the lights are left on in the room, the lights will automatically turn

OFF after 2 hours. ( this is Light-Minder)

Light-Minder

Safe-Exit