Casablanca Fan Company Panama 6643Z - Manual (Page 10)

10
Step 6a. attach the fan wires to the ceiling fixture outlet
box wiring by twisting the bare ends of the wires together
and then securing with a wire nut. Test that the connection
is secure by pulling on the wire nut. Connect in this order:
Step 6b. w-85 wiring Connections
• GreeN leads from mounting plate and fan to GroUNd
conductor of power source. Secure with wire nut.
• whITe wire from fan to white NeUTral wire in ceiling
fixture outlet box. Secure with wire nut.
• Black power wire from fan to Black power wire in ceil-
ing outlet box. Secure with wire nut.
Step 6c. Pull Chain Connections
• GreeN leads from mounting plate and fan to GroUNd
conductor of power source. Secure with wire nut.
• whITe wire from fan to white NeUTral wire in ceiling
fixture outlet box. Secure with wire nut.
• Black power wire from fan to Black wire from w-81 in
ceiling outlet box and the BLUe wire form light kit. Secure
with wire nut.
• BlUe wire from fan to Yellow wire from w-81 in ceiling
outlet box. Secure with wire nut.
2 wHITe wIreS
2 BLaCk
wIre NUT
PULL CHaIN
CoNNeCTIoNS
3 GreeN wIreS
3 GreeN wIreS
2 wHITe wIreS
2 BLaCk + 1 BLUe
w-85 CoNNeCTIoNS
Step 7. Tuck the wires into the canopy
with the wire nuts pointed upwards, so
that the wHITe and BLaCk wires are on
opposite sides of the canopy and all wires
are clear of the canopy opening.
Step 8. Install canopy hatch with the
last canopy screw and lock washer. To
do this, tilt the fan body away from the
hatch opening.
Tighten the screws firmly by hand only,
TILT THe
faN To
INSTaLL
LaST
CaNoPY
SCrew
CaNoPY
HaTCH
CaNoPY
SCrew
LoCk
waSHer
Step 9. Straighten the fan, then check
to ensure that there is no movement be-
tween the canopy and ceiling or Hang-Tru
ball and top support shaft.
CaNoPY HaTCH INSTaLLaTIoN
CaNoPY eLeCTrICaL CoNNeCTIoNS
If you will be installing an accessory light kit, also connect
the BLUe light power wire from fan to the BLaCk wires).