Cambridge SoundWorks NEWTON MC650HD - Manual (Page 5)

5
1. Press the speaker’s red terminal to expose the hole in
its shaft.
2. Insert the stripped end of one cable’s positive conductor
into the speaker’s red (+) terminal.
3. Release the terminal to secure the connection. Make
sure no stray strands of wire are present.
4. Repeat the procedure for the cable’s other conductor
and the speaker’s black (–) terminal.
5. Connect the opposite end of the speaker cable to the
speaker outputs of your receiver. Remember to
observe channel and polarity (Left Positive, Left
Negative, Right Positive, Right Negative).
6. Repeat the process for each speaker.
TO ATTACH THE WIRES