beautypg.com

Troubleshooting – SINGER CF Classic Finish User Manual

Page 7

background image

12

13

TROublEShOOTING

prOBLem

reASON & SOLUTION

Iron does not heat

The iron is not properly plugged in

The temperature setting is too low – set the temperature

to a higher setting

Auto-Off has been engaged – move or shake the iron

gently to de-activate Auto-Off

No steam or not enough
steam

The water tank may be low or empty – add water

The iron is not set to steam setting – for maximum steam,

temperature should be on

MAX

variable Steam is set too low – turn the variable Steam

Control Dial to

the MAX position

Iron is emitting small
particles or odor

This is normal – follow instructions for first time use

Water may need to be changed

Buildup of mineral deposits inside steam chamber – see

Self-Cleaning section

Iron is dripping water
from steam vents

Overfilled – do not fill past the mAX line on water tank

The iron may not be hot enough – set the temperature

to

MAX

Overuse of Burst of Steam – allow more time between

bursts

If troubleshooting does not solve the problem, please call SINger at
1-800-4-SINger or 1-800-474-6437.

SINger

®

SeWINg COmpANY LImITeD WArrANTY

CLASSIC FINISh™ STeAm IrON

IMPORTANT: SAVE THIS DOCUMENT AND KEEP IT IN A SAFE PLACE

What Does This Limited Warranty Cover?
The SINGER Classic Finish™ Steam Iron is warranted to be free from defects in
material and workmanship.

how Long Is This Limited Warranty?
The warranty for the IRON’s wiring and electronic parts is for a period of two (2) years
from the date of purchase.
The warranty for all other parts of the IRON is for a period of ninety (90) days from
the date of purchase.

What Will SINger Do?
If the electronic parts and/or the other parts in the IRON, after inspection by SINGER,
prove to be defective during the applicable warranty period(s), the electronic parts
and/or the other parts will be repaired or replaced at SINGER’s option, without
charge, except for any expense associated with sending the IRON to SINGER.
If SINGER sends a replacement IRON, it will carry the remaining warranty of the
original IRON.

Who Is Covered By This Limited Warranty?
This warranty may only be used by the original consumer owner of the IRON and
may not be transferred or assigned.

What Are The Other exclusions or Limitations?

Service under this warranty may only be obtained within the 48 contiguous states,

Alaska, Hawaii and Canada.
The IRON is warranted only for normal household (non-commercial) use. This

warranty does not cover defect(s) caused by abuse, lack of maintenance or other
neglect, failure to follow the care, cleaning or other instructions for the IRON,
misuse, or events beyond our control.
ANY IMPLIED WARRANTY APPLICABLE TO THE IRON, INCLUDING WITHOUT

LIMITATION THE WARRANTIES OF MERCHANTABILITY AND/OR FITNESS
FOR A PARTICULAR PURPOSE, IS LIMITED IN DURATION TO THE DURATION
OF THIS WRITTEN WARRANTY. SINGER SHALL NOT BE LIABLE FOR
CONSEQUENTIAL ECONOMIC DAMAGES RESULTING FROM BREACH OF THIS
WARRANTY OR ANY IMPLIED WARRANTY.
SINGER does not authorize any person to create for it any obligation or liability

in connection with the IRON and any of its parts beyond those set forth in this
warranty.
SINGER disclaims liability under this warranty for any damage or defect resulting

from the use of other than SINGER parts and SINGER approved service in the
repair and maintenance of the IRON.