beautypg.com

20 vehicle care – Cadillac 2011 CTS-V Sports Sedan User Manual

Page 342

background image

Black plate (20,1)

Cadillac CTS/CTS-V Owner Manual - 2011

10-20

Vehicle Care

What to Use

{

WARNING

Adding only plain water or some
other liquid to the cooling system
can be dangerous. Plain water
and other liquids, can boil before
the proper coolant mixture will.
The coolant warning system is set
for the proper coolant mixture.
With plain water or the wrong
mixture, the engine could get too
hot but you would not get the
overheat warning. The engine
could catch fire and you or
others could be burned. Use a
50/50 mixture of clean, drinkable
water and DEX-COOL coolant.

Use a 50/50 mixture of clean,
drinkable water and DEX-COOL
coolant. If using this mixture,
nothing else needs to be added.
This mixture:

.

Gives freezing protection down
to −37°C (−34°F), outside
temperature.

.

Gives boiling protection up
to 129°C (265°F), engine
temperature.

.

Protects against rust and
corrosion.

.

Will not damage aluminum parts.

.

Helps keep the proper engine
temperature.

Notice: If an improper coolant
mixture is used, the engine could
overheat and be badly damaged.
The repair cost would not be
covered by the vehicle warranty.
Too much water in the mixture
can freeze and crack the engine,
radiator, heater core, and other
parts.

Never dispose of engine coolant
by putting it in the trash, pouring
it on the ground, or into sewers,
streams, or bodies of water.
Have the coolant changed by an
authorized service center, familiar
with legal requirements regarding
used coolant disposal. This will help
protect the environment and your
health.

Checking Coolant

The vehicle must be on a level
surface when checking the coolant
level.

The engine coolant reservoir is
located in the engine compartment
on the driver side of the vehicle.
See Engine Compartment Overview
on page 10‑6
.

Check to see if coolant is visible in
the surge tank. If the coolant inside
the surge tank is boiling, do not do
anything else until it cools down.
If coolant is visible but the coolant
level is not at or above the FULL
COLD mark, add a 50/50 mixture
of clean, drinkable water and

This manual is related to the following products: