Woo Audio WA7 Fireflies - Manual (Page 8)

©2014 WOO AUDIO tm Inc. All rights reserved. www.wooaudio.com Rev 1.0. May, 2014 8
Installing the AC power cord
(not supplied)
Plug the power cord into the AC inlet; see in the above diagram. The AC inlet socket is a standard IEC type.
You will need to obtain the correct type for your region if it not supplied with your order.
Selecting AC voltage:
Installing Tube Protection Glass:
Do not hit the tubes by the glass. The glass is heavy. Handle with both hands.
U.S. European U.K.



Place the supplied (4 pieces) anti-slip silicone pads
on each corner of WA7tp. This will prevent the
glass from rubbing on the metal chassis. There are
no adhesives on the silicone pads so no worries of
glue residue.
Voltage on WA7tp is user selectable between 110v and
220v.
Prior to installing the vacuum tubes and
glass, carefully turn over the WA7tp and
check the voltage switch is set to correct
voltage for your country.