Woo Audio WA7d Fireflies Duo User Manual

Page 12

www.wooaudio.com

Rev 1.0. May, 2014

Installing the USB driver (Windows PC only)
*These steps only apply for Windows 7.

1. Plug in the USB 2.0 cable to the WA7 Fireflies and your computer.
2. Install the WA7 Fireflies Driver from the downloaded file from

http://www.wooaudio.com/drivers/wa7-fireflies-driver-1.01.zip

3. Unzip the downloaded file. Locate setup.exe file and run it.
4. Follow on-screen instruction to complete the installation. Windows restart may be

required.

5. Set USB Speakers as your default audio output.

Go to My Computer -> Control Panel -> Hardware and Sounds -> Sounds

-> Click USB Speakers -> Click Set Default

6. Now you're ready to enjoy music from your computer.

Configuring media player

TIPS: It is strongly recommended to use a media player that supports ASIO output mode

for the highest playback quality.

Changing Output mode

Example is given for JRiver Media Center.

IMPORTANT: In JRiver Media Center, disable “Use large hardware buffers” option by

unchecking the box. Buffering error will occur if this option is enable.

Tools -> Options -> Audio Output -> Output mode -> select ASIO

Tools -> Options -> Audio Output -> Output mode settings -> uncheck the box
below