Clarity C320 User Manual

Page 3

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

When using your telephone equipment,
basic safety precautions should always be
followed to reduce the risk of fire, electric
shock and persons including the following:

1. Read and understand all instructions.

2. Follow all warnings and instructions

marked on the telephone.

3. Do not use this telephone near a

bathtub, wash basin, kitchen sink or
laundry tub, in a wet basement, near a
swimming pool or anywhere else there
is water.

4. Avoid using a telephone (other than a

cordless type) during a storm. There
may be a remote risk of electrical
shock from lightning.

5. Do not use the telephone to report a

gas leak in the vicinity of the leak.

6. Unplug this telephone from the wall

outlets before cleaning. Do not use
liquid cleaners or aerosol cleaners on
the telephone. Use a damp cloth
for cleaning.

7. Place this telephone on a stable

surface. Serious damage and/or injury
may result if the telephone falls.

8. Do not cover the slots and openings on

this telephone. This telephone should

never be placed near or over a radiator
or heat register. This telephone should
not be placed in a built-in installation
unless proper ventilation is provided.

9. Operate this telephone using the elec-

trical voltage as stated on the base
unit or the owner’s manual. If you
are not sure of the voltage in your
home, consult your dealer or local
power company.

10. Do not place anything on the power

cord. Install the telephone where no
one will step or trip on the cord.

11. Do not overload wall outlets or

extension cords as this can increase
the risk of fire or electrical shock.

12. Never push any objects through the

slots in the telephone. They can touch
dangerous voltage points or short out
parts that could result in a risk of fire or
electrical shock. Never spill liquid of
any kind on the telephone.

13. To reduce the risk of electrical shock,

do not take this phone apart. Opening
or removing covers may expose you
to dangerous voltages or other risks.
Incorrect reassembly can cause
electric shock when the appliance
is subsequently used.