beautypg.com

Ryobi technologies, inc – Ryobi P910 User Manual

Page 2

background image

Fig. 7

SLEEVES

983000-568
7-04

n

Secure the handle to the toolbox frame using the end

caps provided. While holding the handle firmly, seat end
cap on handle end and apply pressure until it snaps into
place. Repeat with other end cap.

n

Slide the ends of the pull strap through the holes on the

toolbox frame.

Fig. 5

n

Secure pull strap by fastening end to snaps located on

inside of toolbox.

n

Thread handle through the sleeves in the center divider

section and seat in the vertical opening on the opposite
side of the frame.

Fig. 4

Fig. 6

END CAP

PULL

STRAP

END

SNAP

PULL

STRAP END

RYOBI TECHNOLOGIES, INC.

1428 Pearman Dairy Road, Anderson, SC 29625

Post Office Box 1207, Anderson, SC 29622-1207

Phone 1-800-525-2579 • www.ryobitools.com

WARNING:

To prevent possible serious injury, do not sit or stand on
the toolbox.

WARNING

To avoid possible back or lifting injury, use proper lift-
ing techniques and do not attempt to lift an excessive
amount.

WARNING

If carrying a loose battery pack in toolbox, keep it away

from paper clips, coins, keys, nails, screws, or other small

metal objects that can make a connection from one ter-

minal to another. Shorting the battery terminals together

may cause sparks, burns, or a fire.

Always mention the model number when communicating with us regarding this product.