Ryobi ELB001 - Manual (Page 8)

8
WARNING:
If any parts are damaged or missing do not operate this
tool until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories
not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the batteries from the tool
when assembling parts.
FEATURES
KNOW YOUR AIRGRIP EZ REACH™ POWERED
LIGHT BULB CHANGER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ADJUSTABLE EXTENSION POLE
The adjustable extension pole included with your EZ Reach
fully extends to 6 ft. for out of reach light bulbs.
AIRGRIP ™ VACUUM TECHNOLOGY
The AIRgrip System creates a vacuum seal to securely hold
almost any light bulb.
CLUTCH CONTROL
A pre-set clutch control regulates the amount of pressure put
on the light bulb, preventing damage or breakage.
REMOTE CONTROL
Buttons on the remote control allow the operator to grip,
release, install, and remove a light bulb. The remote control
can be conveniently attached to the stick driver or extension
pole using the hook-and-loop pad.
STICK DRIVER
The stick driver’s articulating head can be positioned for easy
access to the light bulb. The motorized stick driver rotates
the suction head to either install or remove the light bulb.
SUCTION HEADS
Two suction heads are provided for use with different sized
light bulbs.
ASSEMBLY
UNPACKING
This product requires assembly.

Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Stick Driver
Adjustable Extension Pole
AIRgrip System
Hook-and-Loop Pad
Remote Control
Screws (2)
Storage Rack
Suction Head (2)
Wall Anchors (2)
9 Volt Battery (3)
Operator’s Manual