Perfectfit, Test for collar fit, Set the static correction level – Petsafe YardMax™ Rechargeable In-Ground Fence Add-A-Dog® Extra Receiver Collar User Manual
Page 19

www.petsafe.net 19
PerfectFit
™
Test for Collar Fit
This test is an added feature to verify fit but is not required
for the system to function. After the ReadyTest
®
, the
Receiver Collar will go into PerfectFit
™
test mode. This
mode begins with a flashing yellow light. To use this feature,
you must place the Receiver Collar on your dog within 90
seconds of disconnecting the charger from the Receiver
Charging Jack or turning the Receiver Collar ON. The
Receiver Collar will emit an alarm tone as the Contact Points
touch your dog’s skin. You will know you have the proper fit
when the collar tones and flashes green 5 consecutive times.
After 90 seconds, the Receiver Collar moves into normal
operation mode.
Set the Static Correction Level
The Static Correction levels increase in strength from 1 to 6.
Refer to the table on page 20 to choose the Static
Correction that best fits your dog. The Receiver Collar will
emit a Warning Tone whenever your dog enters the Warning
Zone, no matter what correction level is selected. If your
dog continues into the Static Correction Zone, and the
Receiver Collar is set to level 2 or above, your dog will
receive a correction.