Petsafe Pawz Away® Mini Pet Barrier User Manual

Page 15

www.petsafe.net 15

4. To program the Receiver Collar to either mode A or mode B, press and hold the (-) button and then press the (+) button

for approximately 5 seconds. Programming is complete when you hear a series of three beeps from the Receiver Collar.

5. Once the Receiver Collar has been programmed, press the (+) button to turn the

Barrier Transmitter ON. Check to make sure the black bar(s) appear on the LCD screen indicating the mode you have

selected (5B) and reset the Barrier Transmitter to the desired range.

Mode A

Mode B

Mode AB