Petsafe Innotek UltraSmart Micro Remote Trainer - Manual (Page 3)

Step 2
Turning the collar ON and OFF
Step 1
Power Up
Quick Start Guide
IUT-300E
INNOTEK ® UltraSmart ™ Micro Remote Trainer, 275m
Remote: Insert 12v alkaline battery in the handheld remote. Replace the access
panel.
Collar: Charge the collar on the power outlet-mounted charging station. The light
on the collar will glow red while charging, and green when fully charged.
a. Press the button (for collar) on the remote once or
twice until appears in the display.
b. Hold the collar one inch from the remote, taking care not to touch the
metal contacts that touch your dog’s skin.
c. Press the button. The collar will emit a
start-up tone, and the light will glow solid green.
d. To turn collar OFF, hold collar and remote one inch apart and press
the button. The collar will emit a shut-down tone, and the light will glow solid red, then go out.
NOTE: To use two collars, repeat the procedure with the second collar.
This ON/OFF command only works when remote and collar are in close proximity; it will not work at a
distance. Never turn the unit ON/OFF while your dog is wearing the collar.
2