Petsafe Innotek UltraSmart Micro Remote Trainer - Manual (Page 3)

Step 2
Turning the collar ON and OFF
Step 1
Power Up
Quick Start Guide
IUT-300 & IUT-302
INNOTEK ® UltraSmart ™ Micro Remote Trainer, 300 yards
Remote: Insert 12v alkaline battery in the handheld remote.
Replace the access panel.
Collar: Charge the collar on the power outlet-mounted charging
station. The light on the collar will glow red while charging, and green when fully charged.
a. Press the
C
button (for collar) on the remote once or
twice until
D
appears in the display.
b. Hold the collar one inch from the remote, taking care not
to touch the metal contacts that touch your dog’s skin.
c. Press the
t
button. The collar will emit a
start-up tone, and the light will glow solid green.
d. To turn collar OFF, hold collar and remote one inch apart and press the
t
button. The collar
will emit a shut-down tone, and the light will glow solid red, then go out.
NOTE: IUT-302 users, repeat the procedure with the second collar.
This ON/OFF command only works when remote and collar are in close proximity; it will not work
at a distance. Never turn the unit ON/OFF while your dog is wearing the collar.
1