Petsafe Drinkwell® Zen Fountain - Manual (Page 8)

8
1) Place the pump inside the bowl’s square indention (Fig. 15a) with the
circular opening on the pump positioned in the back left corner. Insert the
pump tube into the opening on the pump and press down (Fig. 15b).
PUMP MAINTENANCE
Fig. 15a
2) With the pump in place, pass the cord through the opening at the
back of the bowl. Feed the cord all the way through and push the
rubber grommet into place to seal the hole. Be sure to leave enough
slack in the cord so that the pump rests flat.
Fig. 15b
5) Once the pump is completely disassembled, you can clean the
parts with warm, soapy water. Use a cotton swab or bottle brush to
get inside the pump’s cavity and remove any build-up (Fig. 14). For
added disinfecting and/or hard water removal, clean the pump with
white vinegar.
6) Once the parts are clean and well rinsed, you can reassemble the
pump for use.
a) Replace the impeller
b) Replace the stator
c) Replace the intake plate
Fig. 13 Fig. 14
REASSEMBLY OF YOUR FOUNTAIN