Petsafe Deluxe Bark Control - Manual (Page 10)

10 1-800-732-2677 www.petsafe.net 11
To Test the Bark Control Collar
Important: To avoid feeling the Static Correction yourself, never touch the two Contact
Points simultaneously.
Enter the Test Mode. If your collar is not in the Test Mode, “See 1.
Modes of Operations” for Push-button instructions.
Hold the unit by the collar with the Indicator Light facing towards
2.
you. The unit should be within 6-10 inches of your mouth.
In order to trigger the unit, say “Test” loudly into the Sound
3.
Activated Sensor.
The Indicator Light will flash three times to show that it is
4.
functioning properly.
If the Indicator Light does not flash, ensure that the battery is properly
5.
installed, and/or replace the battery. If the Indicator Light still does not
flash, contact the Customer Care Center at 1-800-732-2677.
Return the Bark Control Collar to Low Mode before replacing the
6.
unit on your dog.
TEST!
Note: The Test Mode is not intended for normal operation. If the Bark Control Collar is left in Test Mode
while on your dog, it can cause false correction and may reduce battery life.
Accessories
To purchase additional accessories for your PetSafe ® Deluxe Bark Control Collar ™ , contact the
Customer Care Center at 1-800-732-2677 or visit our website at www.petsafe.net to locate a
retailer near you.