PDR Mounts dpm100 - Manual (Page 2)

not install in locations where there are excessive amounts of dust
Do not block the ventilation holes. Leave sufficient clearance in regard to the surroundings to avoid blocking the ventilation. .
Do not install in locations where there is excessive vibration or impact. Injury and damage could result from the panel displays
Use the specified bolts and screws in the specified places and tighten firmly. Failure to do this could cause injury if the panel
Always use at least two people to perform the installation work. Injury could result from dropping heavy objects.
be installed must be capable of long-term support of the total load of
be taken to ensure sufficient strength to
bration and other external forces.
displays to fall and cause injury.
anel displays + pole mount)
MAXIMUM WEIGHT - 500 Lbs. ( 226 Kg.)
INSTALLATION LOCATION
Do not install close to an air conditioner intake or outlet. Do
oily smoke or tobacco smoke. Fire could result.
falling.
displays fall.
Do not alter any of the parts. Do not use broken parts.
The ceiling where the mount is to
the panel displays and DPM-100 mount. Measures should also
withstand the force of earthquakes, vi
Note: Incorrect installation can cause the
Total load of the panel (p
2
CAUTION
WARNING
WARNING
Rev 033108
Caution: Installation o
location by checking the ceiling structure and durability for safety and accident prevention
f units to be carried out by qualified technicians only. Install in an appropriate