Outdoor Great Room CNG-Traveler Gas Grill - Manual (Page 9)

The Outdoor GreatRoom Company • Cook Number Grill CNG-TRAVELER Gas Grill • Rev. A
9
Step 5. Install Searing Plate and
Grilling Grate
1. Parts/Items Needed: Searing plate and grilling grate.
2. Open the grill hood and remove and discard any other
debris found in the burner compartment.
3. Hold the searing plate with the two feet on the bottom
away from you and set it into the back of the grill com-
partment. The bottom feet of the plate rest along the rear
ledge of the compartment and the front edge rests on top
of the factory installed cross member. (See Figure 6).
Figure 6
Figure 7
4. Slide the grilling grate into the grill compartment. The
back edge will rest on the fixed cross member and the
front edge on the front ledge in the compartment. (See
Figure 7).
Searing Plate
Grilling Grate