Night Optics Panther 336 Thermal Riflescope (336x256 | 50mm) - Manual (Page 9)

Optical Focus: To Adjust optical Focus, rotate the optical focus adjustment knob (fig. 1-11) located
on the objective lens, from left to right until desired image clarity is achieved.
Diopter Focus: The Diopter (fig. 1-8) adjustment is used to focus the eyepiece to the display. When
adjust properly, on-screen information, such as - Battery indicator and reticle, should appear sharp
and clear. Adjust this setting by rotating the ribbed area of the rubber eye guard closest to the body
of the scope until the on-screen image becomes clear.
OPERATION
8
COMPLETE MENU SYSTEM
SCOPE SETTINGS
RETICLE SETTINGS
COLOR SCHEME
SERVICE
INFO
RETICLE SETTINGS
RETICLE TYPE
RETICLE COLOR
ELEVATION ADJUST.
WINDAGE ADJUST.
RETICLE SETTINGS
GREEN
RED
YELLOW
WHITE
BLACK
RETICLE TYPE
NO RETICLE
CROSS HAIR
MIL-DOT
SERVICE
SHUTTER
LANGUAGE
AUTO BRIGHTNESS
COLOR SCHEME
NO SCHEME
RED-GREEN
RED-BLUE
SPECTRUM 1
SPECTRUM 2
SPECTRUM 3
BLACK-YELLOW
On Screen Display (Up/Down)
XX.XX cm / 100m
On Screen Display (Left/Right)
XX.XX cm / 100m
SHUTTER
OFF
ON
AUTO BRIGHTNESS
OFF
ON
LANGUAGE
ENGLISH
Main Menu Level 2 Menu Level 3 Menu
FIGURE 7: Menu System
FOCUSING (OPTICAL AND DIOPTER)