MK Diamond MK-101 Lowes - Manual (Page 28)

28
(G)
Install the post support and
tighten Retaining Bolts
aDJUSTiNG THe POST FOR MaXiMUM CUTTiNG leNGTH
The Cutting Head and Post are heavy. Care must be used when changing the
position of the Cutting Head.
CaUTiON
(A)
Remove Water Basin
(B)
Remove the Cutting Head (See
Adjusting the Cutting Head)
(C)
Loosen the Retaining Bolts
(D)
Remove the Retaining Bolts.
Be sure to remove Standoffs
with the bolts.
(E)
Move Standoff and bolt to
rear post retaining hole
(F)
Relocate the Post to the rear
Post retaining holes
(H)
Install the Cutting Head in
rear Pivot Hole (See Adjust-
ing the Cutting Head)
(I)
Install the Water Basin and
blade
MK-101 aDJUSTMeNT