Trouble shooting – Magnum Dynalab MD-208 User Manual
Page 13

- 13 -
TROUBLE SHOOTING
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
No sound, meter
lights are not on
Power cord disconnected
Power off at source
Fuse blown
Connect power cord
Check AC source
Check rear panel fuse
No sound, meter
lights on
Interconnect not properly
installed
Preamp set to wrong
source
Power amp off
Check installation of
interconnects
Turn preamp to tuner
Turn on amp
Signal strength is
low
Antenna not connected
Wrong type of antenna
Station too far away
Antenna pointed the
wrong way
Check antenna hookup
Check instruction
manual for types of
antennas
Change your antenna
Rotate the antenna to
point at the station
Reception is poor
Antenna not connected
Wrong type of antenna
Cross talk from
neighboring stations
Multi-path is occurring
Check antenna hookup
Check instruction
manual
Switch to BW 2 switch
# 7
Rotate your antenna,
read Reception
Techniques
Intermittent sound
Mute switch is “ON”
Turn mute switch “OFF”