M2TECH Young - Manual (Page 24)

YOUNG
384
k H z /32bit digital-TO-ANALOG CONVERTER
REVISION 1.o – NOVEMBER 2010
Copyright © 2010, M2Tech Snc di Manunta & Marino
24
M2Tech
www.m2tech.biz
12. Technical Specifications
Sampling frequencies: ...................... 44.1, 48, 88.2, 96, 176.4*, 192*, 352.8**, 384kHz**
Resolution:........................................ 16 to 32 bits***
USB: ................................................. 2.0 high speed
Clock precision: ................................ +/-10ppm 0 to 60°C, 2ppm typical @ 25°C
S/PDIF input sensitivity: .................... 0.5Vpp +/-0.1V
S/PDIF input impedance: .................. 75 Ohms
AES/EBU input sensitivity: ................ 2Vpp +/- 0.5V
AES/EBU input impedance: .............. 110 Ohms
S/PDIF and AES/EBU inputs bit-rate up to 24.576Mbps (up to 192kHz sampling
frequency)
Toslink™ input bit-rate: ..................... up to 15Mbps (up to 96kHz sampling frequency)
Analog output voltage: ...................... 2.65V
rms
@ 0dBFS
THD+N:............................................. 0.0003% (1kHz @ 0dBFS, 0-22kHz)
S/N ratio:........................................... 122dB (A-weighted)
Minimal requirements:....................... 1.3GHz CPU clock, 1GB RAM, 2.0 USB port
Supply voltage: ................................. 15 to 18V
DC
(20V
DC
max)
Power consumption: ......................... 240mA @ 15V (no output loaded)
Size: ................................................. 200x50x200mm (w x h x d, cabinet)
200x55x210mm (w x h x d, with connectors and feet)
360x120x260mm (w x h x d, box)
Weight:.............................................. 1.7kg (DAC only)
3kg (box)
* all inputs except Toslink™. Depending on the fiber used and the transmitter’s power,
176kHz and 192kHz may be achieved with Toslink™, too, but this feature is not
guaranteed.
** USB input only.
*** 32 bits are accepted on USB input only.