M2tech, Cleaning the unit, Tips on using the usb input – M2TECH Young User Manual
Page 23
YOUNG
384
k
H
z
/32bit digital-TO-ANALOG CONVERTER
REVISION 1.o – NOVEMBER 2010
Copyright © 2010, M2Tech Snc di Manunta & Marino
23
M2Tech
www.m2tech.biz
9. Using a power supply different from the standard one
The Young comes with a 15V/1A wall adapter. This unit has been tested to comply with
the Young’s power and supply quality requirements and allows for very high performance.
Nevertheless, a better (and more expensive) unit could squeeze the last degree of
performance from the Young.
We advice users that using a different power supply than the one included in the package
will void the warranty: no warranty claim will be acknowledged for damages due to the use
of power supply different from the one included in the package or other units specifically
designed by M2Tech for the Young.
Should the user decide to use another power supply, the specifications listed in section 11
must be observed.
10. Cleaning the unit
The Young should be cleaned with a soft, damp cloth. Do not use alcohol or other cleaning
liquids to avoid damaging the unit.
11. Tips on using the USB input
Depending on the PC or Mac being used, it is necessary to first connect and then power
up the Young or first power up and then connect the Young. Please try both ways to see
which one fits best to your computer.
Some care must also be used when switching from USB to other inputs and back. It’s
always a good practice to stop the player on the computer before switching to another
input.