Home Styles 5061-601 - Manual (Page 2)

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
STEP 1
Insert Bolts and Bolts (long) into the pre-drilled
holes of Stretcher (D), then attach 17X Rails (G)
to Stretcher (D) and tighten. (See Figure 1)
Attach Stretcher (E) to unit with Tapered Head
Cap Bolts (long). (See Figure 2)
B
F
G
B C
B
B
B
D
B E
Tapered
Head Cap Bolt (long)
Tapered
Head Cap Bolt (short)
Bolt
Bolt (long)
Figure 1 Figure 2
/3
STEP 2
Turn the unit over.
Attach Post (B) to unit with
Tapered Head Cap Bolts (short).
Attach Stretcher (F) to unit with Tapered Head Cap Bolts (short).
Attach Post (C) to unit with Tapered Head Cap Bolts (short).