Home Styles 5670-30 - Manual (Page 2)

Assembly Instructions 2
STEP 1
Attach Legs (D) to Stretcher (C) with
Head Cap Bolts, Spring Washers and
Flat Washers.
Tighten all Bolts only half way with
Hex Wrench.
(See fi gure 1)
STEP 2
Attach Frame (B) to unit with
Head Cap Bolts.
Tighten all Bolts with Hex Wrench.
D
D
D
D
B
C
Figure 1
/3
Head Cap Bolt
Head Cap Bolt
Spring Washer
Flat Washer
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.