Home Styles 5660-581 - Manual (Page 2)

B
Assembly Instructions
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
STEP 1
Attach Back (A) and Stretchers
to Leg (D) with Head Cap Bolts
and Cross Dowels.
Attach Leg (E) to the unit with
Head Cap Bolts and Cross Dowels.
STEP 2
Attach Seat (B) to unit with
Head Cap Bolts and Sleeve Bolts.
A
Head Cap Bolt
IMPORTANT
Cross Dowel
A
C
C
D
E
B
Cross Dowel
Head Cap Bolt
Wood Screw
Stop
Figure 1
STEP 3
Attach Stops to the bottom of rockers
with Wood Screws. (see Figure 1)
Sleeve Bolt
Hex Wrench (small)
Hex Wrench (large)
Hex Wrench (small)
Stop Wood Screw