Home Styles 5531-10 - Manual (Page 4)

D
E
STEP 4
Assembly Instructions 3/4
Cam Lock Screw
Cam Lock
Cam Lock
Cam Lock Screws
Magnet
G
F
STEP 3
Attach 2X Magnets to Fixed Shelf (F)
by using Wood Screws in the pre-drilled holes.
Attach Fixed Shelf (F) to Middle Panel (D) with Cam Locks (See figure 2),
to the unit with Cam Locks.
then slide
Back Panel (G) into position.
Attach Middle Panel (E)
Attach Base (I) to the unit with Cam Locks.
Put 3X Cam Lock Screws into the pre-drelled holes of Base (I) as shown,
then attach Back Support (R) to Base (I) with Cam Locks and
attach Side Panel (B) and (C), Plinth (H) to the unit with Cam Locks.
Tighten up Leg (S) in the pre-drilled hole of unit as shown.
I
B
R
S
H C
(Figure 2)