Bradford White M-I-60T6FSX - Manual (Page 25)

25
13. Fiberglass Insulation 27. Pilot Assembly
14. Outer Door (Varies by Model) 28. Steel Burner (Varies by Model)
THE FOLLOWING INSTRUCTIONS ARE FOR INSTALLATION OF:
GAS WATER HEATERS
SUITABLE FOR WATER (POTABLE) HEATING AND SPACE
HEATING
1. All piping components connected to this water heater for space heating
applications must be suitable for use with potable water. In Massachusetts,
space heating piping length must not exceed 50 feet.
2. Toxic chemicals, such as those used for boiler treatment, must not be
introduced into potable water used for space heating.
3. This water heater must not be connected to an existing heating system or
component(s) previously used with a non-potable water heating appliance.
4. When the system requires water for space heating at temperatures higher
than required for other means, such as an ASSE approved mixing valve
shall be installed to temper the water for those uses in order to reduce the
scald hazard potential.
Please refer to the illustrations for suggested piping arrangements.
INTERNET VERSION FOR REFERENCE ONLY