B&C Technologies DP-250 Industrial - Manual (Page 42)

Decomissioning
Decommissioning
In the event that the machine must be
decommissioned, follow these steps:
1. Clean interior of machine, both basket
and shell.
2. Disconnect electrical power.
a. Shut of main power supply at the
breaker box or main control panel.
b. Do not attempt to disconnect power
supply wires from power supply.
Have a qualified electrician
disconnect power to machine at its
source.
3. Disconnect gas/steam supply.
4. Disconnect exhaust system.
5. Remove the machine from its foundation
pad.
a. Keep all panels in place to provide
stability when moving the machine.
b. Verify that door is closed and secure
c. Place the machine on skid and bolt
the frame to the skid. This will
facilitate the removal of the machine
on to a truck.
6. Recycle.
The manufacturer uses the highest quality
material in their products so that those
material may be recycled at the end of the
product’s service life.