beautypg.com

User manual, Manual programme mode, Automatic programme mode – B&C Technologies FC-18 Fire Cabinet User Manual

Page 22

background image

22

©

PODAB 2009

Increase or reduce the temperature with the arrow buttons 3 and 4.
There are three levels:
Minimum (MIN) = 40ºC
Medium (MED) = 60ºC
Maximum (MAX) = 80ºC

The degrees stated above, show the maximum temperature of
the warm air stream.

Set the time
Increase or reduce the drying time with the arrow buttons 6 and
7. The drying time can be increased to maximum 4 h. Lower
temperature requires longer drying time.

Start
Push button 5 to start the cabinet.

Pause programme
To pause a working programme, open the doors. The drying
time is paused. The cabinet will start again when the doors are
closed and the start button is pushed. If the doors are left open
longer than 10 minutes, the programme is interrupted.

Change temperature or time during drying
Temperature and time can be adjusted during the drying pro-
cess and the programme is in the heating phase. When the
cabinet switches to cool down, neither time nor temperature
can be changed.

Interrupt a programme
To interrupt a working programme, push the START/STOP.

Fill the cabinet
To get the best drying result: try to dry the same type of fire-
fighting suits at the same time. Distribute the clothing evenly in
the cabinet. If less than six suits are dried, remove the hangers
not used. The dampers are closed automatically.

Close the doors
The drying cabinet will not start until the doors are completely
closed.

Keypad

Manual programme mode

1.

Automatic programme mode*

2.

Reduce the temperature

3.

Increase the temperature

4.

Start/stop the programme

5.

Reduce the time

6.

Increase the time

7.

LCD-display

8.

*Will also change programme when you are in the automatic
programme mode.

User manual

Manual programme mode

In order to set the time and temperature, push key no 1. LCD-
display shows the settings for manual programmes. The cabi-
net is preset on average temperature 80ºC and 1h and 30 min-
utes drying time.

Set the temperature

Automatic programme mode

The drying cabinet is equipped with the function HTS – Humid-
ity Tracking System. This function is activated in the automatic
programme mode. The drying time adjusts to the laundry in the
cabinet and is controlled by a humidity sensor.

To choose automatic programme mode
Choose automatic programme mode by pushing button 2.

1

3

4

5

6

7

2

8