Casio TRYX EX-TR100 - Manual (Page 96)

96
Other Settings (Set Up)
Procedure
MENU * Setup * Sounds
• Setting a volume level of 0 mutes output.
Procedure
MENU * Setup * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: July 10, 2012, 1:25 p.m.
• Even if you do not stamp the date and/or time with Timestamp, you can do so later
using some printing application.
• Stamping is performed in accordance with the date and time settings (page 98) and
the display style settings (page 99).
Configuring Camera Sound Settings (Sounds)
Startup
Toggles the operation tone between on and off.
Half Shutter
Shutter
Operation
Volume
Operation
Specifies the sound volume. This volume setting is also
used during video output (from the HDMI port) (page 69).
Playback
Specifies the volume of movie audio output. This volume
setting is also used during video output (from the HDMI
port) (page 69).
Time Stamping Snapshots (Timestamp)
Date 2012/7/10
Date&Time 2012/7/10 1:25pm
Off No stamping of date and/or time